5.2.4 Adding Devices
You can add devices to the management platform of the main controller in batches or one by one.
If the controller was set to the main controller while you were going through the login wizard, you
can add and manage sub controllers through the Platform.
Only the main controller comes with a management platform.
5.2.4.1 Adding Device One by One
You can add sub controllers to the main controller one by one.
Procedure
Step 1
On the home page, click Device Management , and then click Add.
Step 2
Enter the device information.
Figure 5-8 Device information
Table 5-4 Device parameters Description
Parameter
Description
Device Name
Enter the name of the Controller. We recommend you name it
after its installation area.
Add Mode
Select IP to add the Access Controller by entering its IP address.
IP Address
Enter the IP address of the controller.
Port
The port number is 37777 by default.
Username/Password
Enter the username and password of the Controller.
Step 3
Click OK.
The added controllers are displayed on the Device Management page.
Quick Start Guide
32
