Dahua ASC1204B, Руководство пользователя

Страница: 21 / 36

Installation Guide 11
Figure 2-13

the switch is at ON position, meaning 1.
 the switch is at the bottom, meaning 0.

1
～
8 are all 0; the system is started normally.
 1
～
8 are all 1; the system enters BOOT mode after start.

1, 3, 5 and 7 are 1, while others are 0. After reboot, the system restores factory defaults.

2, 4, 6 and 8 are 1, while others are 0. After reboot, the system restores factory defaults,
but user info is retained.
2.6 Reboot
Insert a needle into reboot hole, press it once to reboot the device.
Reboot button is to reboot the device, rather than modifying configuration.