Important Safeguards and Warnings
II
Important Safeguards and Warnings
This Chapter describes the contents covering proper handling of the access standalone,
hazard prevention, and prevention of property damage. Read these contents carefully before
using the access standalone, comply with them when using, and keep it well for future
reference.
Operation Requirement
Do not place or install the access standalone in a place exposed to sunlight or near the
heat source.
Keep the access standalone away from dampness, dust or soot.
Keep the access standalone installed horizontally on the stable place to prevent it from
falling.
Do not drop or splash liquid onto the access standalone, and make sure there is no object
filled with liquid on the access standalone to prevent liquid from flowing into the access
standalone.
Install the access standalone in a well-ventilated place, and do not block the ventilation of
the access standalone.
Operate the access standalone within the rated range of power input and output.
Do not dissemble the access standalone.
Transport, use and store the access standalone under the allowed humidity and
temperature conditions.
Electrical Safety
Improper battery use might result in fire, explosion, or inflammation.
When replacing battery, make sure the same model is used.
Use the recommended power cables in the region and conform to the rated power
specification.
Use the power adapter provided with the access standalone; otherwise, it might result in
people injury and device damage.
The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)
standard, and supply power with rated voltage which conforms to Limited power Source
requirement according to IEC60950-1. Please note that the power supply requirement is
subject to the device label.
Connect the device (I-type structure) to the power socket with protective earthing.
The appliance coupler is a disconnection device. When using the coupler, keep the angle
for easy operation.
