background image

Quick Start Guide 

III 

Important Safeguards and Warnings 

This section introduces content covering the proper handling of the Device, hazard prevention, and 
prevention of property damage. Read carefully before using the Device, comply with the guidelines 
when using it, and keep the manual safe for future reference. 

Operation Requirements 

 

  Make sure that the power supply of the device works properly before use. 

  Do not pull out the power cable of the device while it is powered on. 

  Only use the device within the rated power range. 

  Transport, use and store the device under allowed humidity and temperature conditions. 

  Prevent liquids from splashing or dripping on the device. Make sure that there are no objects 

filled with liquid on top of the device to avoid liquids flowing into it. 

  Do not disassemble the device. 

Installation Requirements 

 

  Connect the device to the adapter before power on. 

  Strictly abide by local electrical safety standards, and make sure that the voltage in the area is 

steady and conforms to the power requirements of the device. 

  Do not connect the device to more than one power supply. Otherwise, the device might become 

damaged. 

 

  Observe all safety procedures and wear required protective equipment provided for your use 

while working at heights. 

  Do not expose the device to direct sunlight or heat sources. 

  Do not install the device in humid, dusty or smoky places. 

  Install the device in a well-ventilated place, and do not block the ventilator of the device. 

  Use the power adapter or case power supply provided by the device manufacturer. 

  The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no 

higher than PS2. Note that the power supply requirements are subject to the device label. 

  Connect class I electrical appliances to a power socket with protective earthing. 

Содержание ARM310-W2-868














Отзывы: