Dahua ARC3008C, Руководство по установке, Страница: 9 / 111

Alarm Control Panel Installer Manual
8
 Supports abnormality alarm, including network disconnected alarm, PSTN fault alarm, tampering
alarm, low battery alarm, battery loss alarm, power loss alarm, and keyboard faults alarm.
 In-field firmware upgradable.
 App-based system control through DMSS.
Terms and Definitions 1.3
Refer to the terms and definitions that are used in the Manual as below.
Table 1-1 Terms and definitions
Term Definition
Area The 8 Areas that can be armed.
Zone Protection zones under Area.
Partition The scope of Partition is larger than Zone and under Area.
Numeric key Key 0
–9 on the Keypad.
Function key The other keys except Numeric keys, such as ESC and ENTER.
Key combination
+ Numeric key.
User Menu Menus programmed by the User.
Installer Menu Menus programmed by the TECHNICIAN.
Access Code
A specified code, from 4 to 6 digits, that allows the user to operate the
Keypad.
TECHNICIAN
A person that is authorized to access the Installer Menu to program
the system.
1EOL
The detector type can be NO or NC, and returns two status: Normal
and Alarm (short circuit and broken circuit are considered to be Alarm
status).
2EOL
The detector type can be NO or NC, and returns four status: Normal,
Alarm, Tamper, and Short Circuit prevention.
3EOL
The detector type can be NO or NC, and returns five status: Normal,
Alarm, Tamper, Anti-masking, and Short Circuit prevention.