3 Installation and Configuration
3.1 Framework and Dimensions
The following figures show the dimensions of the device in mm [in.]. These images are intended
as a reference only.
Figure 3-1
3.2 Camera and Cables
The following figure depicts the type and location of each cable coming from the device. This image is
intended as a reference only.
Figure 3-2
Cable Connections
Ref
Port
Connector
1
AUDIO IN
Jack
Receives an analog audio input signal.
2
POWER IN
-
Input from a 12 VDC or 24 VAC power
supply.
Use in accordance with device label
instructions.
3
12 VDC POWER OUT
-
Supplies 12 VDC power to another
device, maximum load 4 W.
4
VIDEO OUT (yellow)
BNC
Analog CVBS video output.
5
VIDEO OUT (black)
BNC
Ultra High-definition HDCVI video
output.
6
I/O
Wire Color
Alarm and control input/output:
Orange
RS485 B-
Yellow
RS485 A-
Black
ALARM-GND, for alarm input/output
Red
ALARM_IN1
Green
ALARM_IN2
Blue
ALARM_OUT, on/off alarm output
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
