Dahua 5000 Series страница 82 Скачать руководство пользователя

Страница: 82 / 83

Cybersecurity Recommendations

5. Change Default HTTP and Other Service Ports

We suggest you to change default HTTP and other service ports into any set of numbers

between 1024~65535, reducing the risk of outsiders being able to guess which ports you

are using.

6. Enable HTTPS

We suggest you to enable HTTPS, so that you visit Web service through a secure

communication channel.

7. Enable Whitelist

We suggest you to enable whitelist function to prevent everyone, except those with

specified IP addresses, from accessing the system. Therefore, please be sure to add your
computer’s IP address and the accompanying equipment’s IP address to the whitelist.

8. MAC Address Binding

We recommend you to bind the IP and MAC address of the gateway to the equipment,

thus reducing the risk of ARP spoofing.

9. Assign Accounts and Privileges Reasonably

According to business and management requirements, reasonably add users and assign a

minimum set of permissions to them.

10. Disable Unnecessary Services and Choose Secure Modes

If not needed, it is recommended to turn off some services such as SNMP, SMTP, UPnP,

etc., to reduce risks.

If necessary, it is highly recommended that you use safe modes, including but not limited to

the following services:



SNMP: Choose SNMP v3, and set up strong encryption passwords and authentication

passwords.



SMTP: Choose TLS to access mailbox server.



FTP: Choose SFTP, and set up strong passwords.



AP hotspot: Choose WPA2-PSK encryption mode, and set up strong passwords.

11. Audio and Video Encrypted Transmission

If your audio and video data contents are very important or sensitive, we recommend that

you use encrypted transmission function, to reduce the risk of audio and video data being

stolen during transmission.

Reminder: encrypted transmission will cause some loss in transmission efficiency.

12. Secure Auditing



Check online users: we suggest that you check online users regularly to see if the

device is logged in without authorization.



Check equipment log: By viewing the logs, you can know the IP addresses that were

used to log in to your devices and their key operations.

13. Network Log

Due to the limited storage capacity of the equipment, the stored log is limited. If you need

to save the log for a long time, it is recommended that you enable the network log function

to ensure that the critical logs are synchronized to the network log server for tracing.

14. Construct a Safe Network Environment

In order to better ensure the safety of equipment and reduce potential cyber risks, we

recommend:



Disable the port mapping function of the router to avoid direct access to the intranet

devices from external network.

Содержание 5000 Series




















































































Результаты поиска

Содержание 5000 Series

Отзывы:

Похожие инструкции для 5000 Series

Бренды по названию

Популярные бренды

Dahua 5000 Series, Быстрый старт

Результаты поиска

Содержание 5000 Series

Отзывы:

Похожие инструкции для 5000 Series

Бренды по названию

Популярные бренды