Dahua 1U Series, Руководство пользователя

Страница: 160 / 361

Standalone DVR User’s Manual
150
Aux
Click , system goes to the following interface. The options here are defined by the
protocol. The aux number is corresponding to the aux on-off button of the decoder. See
Figure 4-28.
Figure 4-28
4.6 Record and Snapshot
The record/snapshot priority is: Alarm->Motion detect->Schedule.
4.6.1 Encode
4.6.1.1 Encode
Encode setting is to set encode mode, resolution, bit stream type and etc
From Main menu->Setting->System->Encode, you can see the following interface. See
Figure 4-29.
Channel: Select the channel you want.
Type: Please select from the dropdown list. There are three options: regular/motion
detect/alarm. You can set the various encode parameters for different record types.
Compression: System supports H.264, MPEG4, MJPEG and etc.
Resolution: System supports various resolutions, you can select from the dropdown
list. Please note the option may vary due to different series.
Frame rate: It ranges from 1f/s to 25f/s in NTSC mode and 1f/s to 30f/s in PAL mode.
Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set
video quality.
Quality: There are six levels ranging from 1 to 6. The sixth level has the highest image
quality.
Video/audio: You can enable or disable the video/audio. Please note, for sub-stream,
you need to enable video function first and then enable audio function.
Copy
：
After you complete the setup, you can click Copy button to copy current setup
to other channel(s). You can see an interface is shown as in Figure 4-32. You can see
current channel number is grey. Please check the number to select the channel or you
can check the box ALL. Please click the OK button in Figure 4-32 and Figure 4-30
respectively to complete the setup. Please note, once you check the All box, you set