Dahua Technology WizMind IPC-PDBW82041-B360, Руководство по эксплуатации

Страница: 63 / 154

Operation Manual
54
Figure 6-44 Schedule
Step 2 Press and drag the left mouse button on the timeline to set arming periods. Alarms will
be triggered in the time period in green on the timeline.
● Click
Copy next to a day, and select the days that you want to copy to in the
prompt interface, you can copy the configuration to the selected days. Select the
Select All
check box to select all days to copy the configuration.
● You can set 6 time periods per day.
Step 3 Click Apply .
Step 4 (Optional) Click
Time Plan Table
to add a new time plan table.
You can:
● Double-click the table name to edit it.
● Click
to delete the tale as needed.
6.4.1.2.2 Record Linkage
The system can link record channel when an alarm event occurs. After alarm, the system stops
recording after an extended time period according to the Post-Record setting.
Prerequisites
● After the corresponding alarm type (
Normal , Motion , or Alarm ) is enabled, the record
channel links recording. For details, see "13.3 Setting Record Plan".
● Enable auto record mode, the record linkage will take effect. For details, see "13.2 Setting
Record Control".
Setting Record Linkage
On the Alarm interface, click to enable record linkage, select the channel as needed,
and set Post-Record to set alarm linkage and record delay.
After Post-Record is configured, alarm recording continues for an extended period after the
alarm ends.