Dahua Technology Wireless Door Detector Plus, Руководство пользователя

Страница: 18 / 24

User's Manual
13
Parameter Value
Entering Delay Time
Entrance and exit delay time.
Exiting Delay Time
Door Status
Open or close status of the door.
●
: Open.
●
: Closed.
External Input
On the hub screen, select a door detector plus from the peripheral list,
select
>
Device Channel
, and then you can view the device
channel of the door detector plus.
You need to enable External Detector Config function in advance.
24 H Protection Zone
Status
Active status of the 24 h protection zone.
●
: Enabled.
●
: Disabled.
Doorbell Status
Open or close status of the doorbell.
●
: Open.
●
: Close.
Transmit through
Repeater The status of whether the door detector plus forwards peripheral
messages to the hub through the repeater.
Program Version The program version of the door detector plus.
5.2 Configuring the Door Detector Plus
On the hub screen, select a door detector from the peripheral list, and then tap to configure
the parameters of the door detector plus.
Table 5-2 Door detector plus parameters description
Parameter Description
Device
Configuration
●
View device name, type, SN and device model.
●
Edit device name, and then tap Save to save configuration.
Area Select the area to which the door detector plus is assigned.
Zone No.
The zone No. assigned to the door detector alarm, which cannot be
configured.
Temporary
Deactivate
●
Tap
Enable
, and then the function of the door detector plus will be
enabled. Enable is set by default.
●
Tap Only Disable Tamper Alarm , and then the system will only ignore
tamper alarm messages.
●
Tap Disable , and then the function of the door detector plus will be
disabled.