Quick Start Guide
1
1 Introduction
1.1 Cable
Waterproof all the cable joints with insulating tape and waterproof tape to avoid water damage and
prevent short circuits from occurring. For details, see the FAQ manual.
Figure 1-1 Cables
Table 1-1 Cable information
No.
Port name
Description
1
12 VDC power
input
Inputs 12 VDC power. Be sure to supply power as instructed in
the manual.
Device abnormity or damage might occur if power is not
supplied correctly.
2
Ethernet port
●
Connects to network with network cable.
●
Provides power to the device with PoE.
PoE is available on select models.
3
Alarm I/O
Includes alarm signal input and output ports, the number of
I/O ports might vary on different devices. For details see Table
4
Audio input
Connects to sound pickups to receive audio signal.
Audio input is available on select models.
5
Audio output
Connects to speakers to output audio signal.
Audio output is available on select models.
Table 1-2 Alarm information
Port Name
Description
ALARM_OUT
Outputs alarm signal to alarm devices.
ALARM_IN
Receives the switch signal of external alarm sources.
ALARM_GND
Ground connection.