Dahua Technology IPC-HDW5842T-ZE, Руководство по эксплуатации

Страница: 332 / 473

Operation Manual
84
6.7.3.3 Configuring Wiper
Procedure
Step 1 Select > > System > Peripheral > Wiper .
Step 2 Configure working mode of wipers.
Figure 6-80 Wiper
Table 6-32 Wiper parameter description
Parameter Description
Interval
The interval between stop mode and start mode. For example, set the time
to 10 s, and the wiper will work every 10 s.
Start, Stop, Once
Configure working mode of the wiper.
●
Click Start , and the wiper works as the set interval time.
●
Click Stop , and the wiper stops working.
●
Click Once , and the wiper works once.
Wash
Select the Schedule check box and set the time, and then the wiper will
work as the configured time. Click Once , and the wiper works once. It can
be used to check whether the wiper works normally.
Step 3 Click Apply .
6.7.4 Manager
6.7.4.1 Requirements
To make sure the system runs normally, maintain it as the following requirements:
●
Check surveillance images regularly.
●
Clear regularly user and user group information that are not frequently used.
●
Change the password every three months. For details, see "6.7.2 Account".
●
View system logs and analyze them, and process the abnormity in time.
●
Back up the system configuration regularly.
●
Restart the device and delete the old files regularly.
●
Upgrade firmware in time.