Dahua Technology IPC-HDW2431T-AS-S2, Быстрый старт

Страница: 9 / 17

Network Configuration 2
2
Network Configuration
Device initialization and IP address setting can be finished with the "ConfigTool" or in web
interface. For more information, see the Web Operation Manual .
 Device initialization is available on select models, and it is required at first use or after the
device being reset.
 Device initialization is available only when the IP addresses of the device (192.168.1.108
by default) and the PC stay in the same network segment.

Plan useable network segment properly to connect the device to the network.
 The following figures and interfaces are for reference only, and the actual product shall
prevail.
Initializing Device 2.1
Double-click "ConfigTool.exe" to open the tool. Step 1
Click . Step 2
The Modify IP interface is displayed. See Figure 2-1.
Modify IP Figure 2-1
Click Search setting . Step 3
The Setting interface is displayed.
Enter the start IP address and end IP address of the network segment in which you Step 4
want to search devices, and then click OK .
All the devices found in the network segment are listed.
Select one or several devices with Status shows Uninitialized , and then click Step 5
Initialize .