Quick Start Guide
1
1
Introduction
Cable
Waterproof all the cable joints with insulating tape and waterproof tape to avoid short circuit and
water damage. For the detailed operation, see FAQ manual.
Cables
Table 1-1
Cable information
No. Port Name
Description
1
Ethernet port
Inputs 12 VDC power. Please be sure to supply power as instructed in the
Guide.
Device abnormity or damage could occur if power is not supplied correctly.
2
Ethernet port
Connects to network with network cable.
Provides power to the device with PoE.
PoE is available on select models.
3
Alarm I/O
Includes alarm signal input and output ports. For detailed information,
see Table 1-2.
4
Audio input
Connects to sound-pick-up device to receive audio signal.
5
Audio output
Connects to speaker to output audio signal.
Table 1-2
Alarm information
Port Name
Description
ALARM_OUT
Outputs alarm signal to alarm device.
ALARM_IN
Receives the switch signal of external alarm source.
ALARM_GND
Ground connection.
Connecting Alarm Input/Output
The camera can connect to external alarm input/output devices through the digital input/output port.
Alarm input/output is available on select models.
