Dahua HD IR Vandal Proof Network Dome Camera Quick Start Guide
6
Install Waterproof Connector
The installation process of waterproof connector for network port is shown in Figure 2-5.
Note
It needs to implement the operation when the device is equipped with waterproof connector and it is
used outdoors.
Figure 2-5
Step 1
Keep the convex groove outward and install the rubber ring into the network port, keep the smaller
hole of the rubber ring outward and install the fixing rubber ring into the main body of the waterproof
connector.
Step 2
Pull the network cable without crystal head through main body of waterproof connector, fixing rubber
ring and waterproof locking cover, make the crystal head of network cable, and then insert it into the
network cable.
Step 3
Put the main body of waterproof connector on the network port and rotate it clockwise to lock the
network port and waterproof connector firmly.
Step 4
Put the waterproof locking cover on the main body of waterproof connector and rotate it clockwise to
lock the waterproof connector and waterproof locking cover firmly.
2.4
Adjust Device Angle
Note
Some models do not have vertical rotation ring, which fails to support image rotation. Please refer
to the actual device for more details.
There is difference on the layout of IR lights for some models, please refer to the actual model for
more details.
