Dahua Technology DHI-LM50-F410, Руководство пользователя

Страница: 22 / 30

15
Time Time Setup
Time Setting Date Picker Set Year/Month/Date Time:Minute
Shutdown Time
Repeat OFF/Once/Everyday/Workday
Time Set time
Power Time
Repeat OFF/Once/Everyday/Workday
Time Set time
Source
HDMI1/HDMI2/PDF/MEDIA/
CUSTOMER
“File Number [1 … 7]” Depends on Source = MEDIA / PDF
Sleep Time
“OFF/10 min /20 min /30 min /60
min /90 min /120 min /180 min /240
min ”
Auto Sleep Off/5 s /10 s /30 s /60 s
Time Sync network Time/OFF
Time Zone
Shanghai/Calcutta/Harare/Karachi/
Brazzaville/Beirut/Jerusalem/
Tehran/Baghdad/Ulaanbaatar/
Damascus/Sydney/Paris/Rome/
London/Dubai/Tokyo
Advanced
Language
English Execute Restore Setting, and the
default is not restored.
Execute Restore Default, and the
default is restored.
Chinese
HDMI Version
HDMI1.4
HDMI2.0 (default)
Power On Mode
Power On
Standby
Last Status
Boot On Source
Switch
“On/Off
Default: Off”
In the off state, the next item "Source
item" is grayed, and the power-
on source is (for SI series, HDMI1,
operator: Android), the power-on source
of OTS/ Sinocloud Center is last source,
displayed as last source;
in the on state, the power-on source
is the signal source designated by the
"Source item" .
Source
HDMI1/HDMI2/PDF/MEDIA/
CUSTOMER/Last Status
Default: Previous state
1. When SCHEDULE is set with startup
time, but the startup time has not
arrived yet, boot the device according
to the signal source set in the “Boot On
Source”.
2. If the source is set in USB, the
booting page is the “U disc homepage”.
Boot Wake
UART Wake
“On/Off
Default: Off”
When UART wake = On
，
, RC off or
power saving can both be waken up by
UART wake.
HDMI Wake
“On/Off
Default: Off”
When HDMI Wake = On, and the
current source is HDMI1/2, power
saving and the current HDMI source are
waken up with signals.
RS322 Control On/Off Default: Off”
Pixel Shift On/Off Default: Off
Restore
Restore Setting Cancel/OK
Restore Settings and OSD settings,
except for the Time option, Language
and volume options.
Restore Default Cancel/OK System resetting
Notes: To wake up PD in the HDMI source, you can set HDMI wakeup “On” .
This product supports timed shutdown and timed startup functions. Refer to the “Shutdown time/Startup time” in the upper table for
details.