User’s Manual
8
parameters of the button.
Table 6-2 Panic button parameter description
Parameter
Description
Device Configuration
●
View device name, type, SN and device model.
●
Edit device name, and then tap
Save
to save configuration.
Area
Select the area to which the button is assigned.
Temporary Deactivate
Whether send sensor information to the alarm hub.
●
Tap
Enable
, and then the button will send alarm messages to
the hub.
Enable
is set by default.
●
Tap
Disable
, and then the button will not send alarm
messages to the hub.
Siren Linkage
When an alarm is triggered, the accessories will report the alarm
events to the hub and alert with siren.
Alarm-video Linkage
When an alarm is triggered, the accessories will report the alarm
events to the hub and then will link events.
Video Channel
Select the video channel as needed.
Alarm Type
Select an alarm event type, and then tap
OK
.
●
Intrusion
: Intrusion alarm.
●
Fire Alarm
: Fire alarm.
●
Medical Help
: Medical alarm.
●
Panic Button
: Panic alarm. Set by default.
●
Gas Alarm
: Gas leak alarm.
If you select an alarm type as
Intrusion
, the button will send
intrusion event messages to the hub.
LED Brightness
Configure the brightness of LED lights. You can select from
Off
,
Low
and
High
.
Accidental Press Protection
Enable
Accidental Press protection
to avoid triggering
unintended operations by accidentally pressing the button.
●
Off
: Disable the accidental press protection function.
●
Press and Hold
: Select
Press and Hold
to enable the
accidental press protection function. Once enabled, you have
to press and hold the button to send alarm messages to the
hub.
●
Double-press
: Select
Double-press
to enable the accidental
press protection function. Once enabled, you have to
double-press the button to send alarm messages to the hub.
Signal Strength Detection
Test the current signal strength.
Button Test
Detect whether the button works.
Cloud Update
Update online.