00:00:00 Using device: /dev/mtd7
00:00:01 Mounted /dev/mtd7
00:00:01 Loading stage2 from NAND file 'n6G5Xw'
00:00:05 Overall: 4195 ms, ubifs = 748 ms, rootfs 3422 ms of which xz = 0 ms of which untar = 0 ms
Starting application...wuxuwuxu
Using existing mount point for /switch/
system time:2017-10-14 17:59:53
W icfg 18:00:22 71/icfg_commit_tftp_load_and_trigger#2695: Warning: TFTP get bringup-config:
Operation timed out.
Press ENTER to get started
Username: admin
Password:
SWITCH#
Enter command, configure device or check device operating status, you can enter ? anytime if you need
help.
4.2 Device Factory Default Config
You can log in the device WEB interface via the following IP address.
Username and password can be applied to log in WEB interface via Console port.
Parameter
Note
IP address
192.168.1.110/255.255.255.0
Username
admin
Password
Admin (Hidden)
Table 4-1
4.3 VLAN Config
VLAN (Virtual Local Area Network) is frequently used during actual application; it is divided into multiple
network basics internally. VLAN is to organize several devices into one network logically, regardless of
the physical location of the devices. Each VLAN is a logical network, which is equipped with all functions
and attributes of traditional physical network. Each VLAN is a broadcast domain; broadcast packet can
only be forwarded within one VLAN, not across the VLAN.
VLAN Based on Port
VLAN based on port means that one switch can realize the division of logical working groups via
controlling interoperability of between two and among several ports. Dividing port VLAN reasonably can
greatly improve network security and bandwidth use ratio, besides; it reduces the probability of
broadcast storm. The model supports 4094 VLAN; it needs to select a VLAN ID when creating VLAN,
