44
4.6.3.1 Enable Web Authentication
After Web authentication is enabled, Web authentication system will redirect the client to
authentication login interface. The user inputs valid username and password, and then submits.
Web authentication system will show successful login interface, and redirect authenticated
client to the designated URL.
Enable Web authentication.
Step 1
In the navigation bar, select “Advanced > Template Management”.
1.
Click
“VAP Template”.
2.
Create VAP template or modify existing template, and enable Web authentication,
3.
as shown in Figure 4-43.
Figure 4-43
Click
“Finish”.
4.
In the navigation bar, select “System Settings > Access Control”.
Step 2
Configure Portal parameters and click
“Save”.
Step 3
Portal setting interface is shown in Figure 4-44. Please refer to Table 4-11 for
parameter descriptions.
