Quick Start Guide
3
2 Network Configuration
Device initialization and IP setting can be finished with the ConfigTool or on web page. For more
information, see web operation manual.
●
Device initialization is available on select models, and it is required at first-time use and after
device is being reset.
●
Device initialization is available only when the IP addresses of the device (192.168.1.108 by
default) and the PC stay on the same network segment.
●
Plan usable network segment properly to connect the device to the network.
●
The following figures are for reference only.
2.1 Initializing the Camera
Step 1
Search for the device that needs to be initialized through ConfigTool.
1. Double-click
ConfigTool.exe
to open the tool.
2. Click
Modify IP
.
3. Select the searching way, and then click
OK
.
4. Select one or several cameras in uninitialized status, and then click
Initialize
.
Step 2
Select the devices to be initialized, and then click
Initialize
.
If you do not provide the email address for password reset, you can reset the password
only through XML file.
Figure 2-1 Password setting
Step 3
Select
Auto-check for updates
as needed, and then click
OK
to initialize the device.