Installation 8
Installing Model C
4.2
Model C installation
Figure 4-7
Table 4-2 Installation item list
No.
Item
No.
Item
No.
Item
No.
Item
①
Mounting surface
②
Expansion bolt
③
Pedestal
④
Locking button
⑤
Self-tapping screw
⑥
Main body
⑦
Enclosure
—
—
Press the locking button
④
to take off the pedestal
③
.
Step 1
Confirm the position of screw holes (and the cable outlet hole if it needs to go through
Step 2
the mounting surface
①
) and drill them on the mounting surface
①
, and then insert the
expansion bolts
②
in the screw holes.
Align the screw holes on the pedestal
③
to those on the mounting surface
①
, and then
Step 3
pull the cable out through mounting surface or the side cable tray. Attach the pedestal
③
to the mounting surface
①
with the self-tapping screws
⑤
.
Put the enclosure
⑦
(with the main body
⑥
inside) back into the pedestal
③
. Connect
Step 4
the device
⑥
to power source and the XVR device, and the live view screen is
displayed.
Rotate the enclosure
⑦
and then rotate the main body
⑥
to get the lens an ideal angle.
Step 5
Model C adjustment
Figure 4-8
