Dahua Technology D-ITC237-PW6M-IRLZF1050-B Скачать руководство пользователя страница 20

Страница: 20 / 110

User’s Manual

Web Configuration

It supports logging in to device web interface through browser on PC, and realizes device

configuration, operation, and management.

The interfaces, and Settings are for reference only, and the actual interface shall prevail.

4.1 Web Login

4.1.1 Recommended Configuration

Refer to Table 4-1 for recommended PC configuration for logging in to the web interface of the

Camera.

Table 4-1 Recommended PC configuration

PC Component

Recommended Configuration

Operating System

Windows 7, and later

CPU

Intel core i3, and faster processor

Graphics

Intel HD Graphics, and later

RAM

2 GB, and larger

Monitor

1024 × 768, and higher

Browser

Internet Explorer 9/11, Chrome 33/41, Firefox 49

4.1.2 Device Initialization

The Camera is delivered uninitialized by default. You need to initialize it, and change its

password before further operations.

Before initialization, make sure that both PC IP, and device IP are in the same network segment,

otherwise it might fail to enter initialization interface.

Step 1 Set IP address, subnet mask, and gateway of PC, and device respectively.



If there is no router in the network, distribute IP address of the same segment.



If there is router in the network, configure the corresponding gateway, and subnet

mask.

The IP address is 192.168.1.108 by default.

Step 2 Use ping ***.***. ***. *** (device IP address) comm, and to check whether network is

connected.

Step 3 Open browser, enter the IP address of the Camera in the address bar, and then press

the Enter key.

Содержание D-ITC237-PW6M-IRLZF1050-B















































































































Результаты поиска

Содержание D-ITC237-PW6M-IRLZF1050-B

Отзывы:

Dahua Technology D-ITC237-PW6M-IRLZF1050-B, Руководство пользователя, Страница: 20 / 110

Результаты поиска

Содержание D-ITC237-PW6M-IRLZF1050-B

Отзывы: