Dahua Technology D-ITC237-PW6M-IRLZF1050-B, Руководство пользователя, Страница: 52 / 110

User’s Manual
41

Delete single plate number: Click of the corresponding plate number
searched, and delete it from the allowlist.

Delete plate number in batches: click Clear All , and then click Confirm in the
dialog box to delete all the allowlist information.
 Adding vehicles to allowlist one by one:
1) Click Add .
Figure 4-43 Add
2) Enter complete plate number, and card ID.
3) Set the Begin Time , and End Time of the plate number which exists in allowlist.
The vehicle will be no longer considered as allowlist vehicle beyond the defined
time range.
4) Enter Vehicle Owner Name , and select Gate Mode (barrier gate) from No
Authorize (no permission of auto opening barrier), and Authorize (auto opening
barrier) as needed.
You need to enable barrier control from Setting > ITC > Blocklist and Allowlist >
Barrier Control.
5) Select Continue Adding , click Save , and the system will save allowlist plate
number information, and directly enter the adding interface of next allowlist plate.
You can also cancel selecting Continue Adding , and then click Save to stop
adding further vehicles.
 Exporting vehicles to allowlist in batches:
1) Click Export, and it pops up the Encrypt Config dialog box.
2) Check Open (encrypt) or Off (do not encrypt) as needed, and then click Confirm .