INSTALLATION
Place the HDCVI DVR
BC581E82
Eight-channel HDCVI Recording Kit
❼
INSTALLATION
Connect Peripherals
❽
• Connect the mouse to the USB port on the rear panel.
• Connect a VGA or HDMI cable to the rear panel and to the
display monitor.
INSTALLATION
Connect Cameras
❾
OPERATION
Log in to the HDCVI DVR
❿
OPERATION
Set Parameters in Startup Wizard
⓫
OPERATION
View Live Video
⓬
• Ground the unit using the ground connec on of the power
supply to protect the unit from damage, especially in damp
environments.
• Protect the plug and power cord from foot traffi
c, being
pinched, and its exit from the unit.
• Do not place the unit in a wet, dusty, extremely hot or an
extremely cold environment; and avoid environments with
strong electromagne c radia on.
• Follow the prompts in the Startup Wizard to set the follow-
ing:
General
Device ID and opera on, Date/Time, Holiday
Schedule
Encode
Video and audio se ngs for each channel
Schedule Recording schedule confi gura on
Record
Main stream and sub stream se ngs
• Set the Username and Password a er ini al start-up.
• Supply the default password (“admin”) for the Admin
user.
• Supply a new password.
• Supply answers for two confi rma on ques ons in case the
password has to be reset.
• A er Admin Security is set, supply the Username and the
new Password.
• Connect the incoming coaxial cable from each HDCVI dome
camera to a BNC connector on the rear panel.
• Connect the DVR to the 12 VDC power supply and turn on
the device using the On/Off bu on.
Rev. 001.005. Copyright © 2017 Dahua Technology. All rights reserved. Information contained in this document is subject to change without prior notice. Dahua does its best to provide accurate information, but cannot be held responsible for typos or mistakes.
• Click Live in the Main Menu.
• Change the Live screen grid if more camera channels are
desired.