User's Manual
6
5 Installation
Prior to installation, connect the siren to the hub and check the signal level at the installation
location. We recommend installing the siren in a place with the signal strength of at least 2 bars.
We recommend installing the siren with expansion screws.
Figure 5-1 Installation
Table 5-1 Installation items
No.
Item name
No.
Item name
1
Wireless siren
4
Expansion bolt
2
ST3 × 18 mm self-tapping screw
5
Wall
3
Attachment panel
—
—
Step 1
Drill 2 holes in wall according to the hole positions of the attachment panel.
Step 2
Put the expansion bolts into the holes.
Step 3
Align the screw holes on the plate with the expansion bolts.
Step 4
Fix the attachment panel with ST3 × 18 mm self-tapping screws.
Step 5
Align the arrow engraved on the rear shell of the siren with the arrow engraved on the
attachment panel, and then fix the siren into the attachment panel in the clockwise
direction.
1
2
3
4
5