8
8. Route the cables from the camera through the installation medium or through the side exit port.
9. Align the three (3) holes on the camera body with the expansion bolts.
10. Insert a self-tapping screw into each hole on the camera body and then into an expansion bolt.
Secure the body to the medium with a Philips-head screwdriver.
11. Place the dome enclosure over the camera body and route the cables if necessary. Secure the
dome enclosure to the dome body with the three hex screws.
12. Connect the video output ports to the associated output device (monitor, DVR) and connect the
power cable to a 12 VDC power supply.
