14
9.
Line up the hook at the top of the dome enclosure with the inside hole of the adapter block
and then push it to the end.
Then, tighten the three M6 screws on the adapter block firmly.
Note:
Ensure the M6 screws are tightly fixed to secure the dome to the wall mount.
Figure 4-5
10. Make the proper wiring connections and supply power to the camera. Refer to Section 3.2 -
Note:
The video connection is covered by a heat-shrink tube. Once the video connection
is made, gently heat the tube to seal the connection and make it waterproof.
