DAHON X-FUSION, Руководство пользователя

Страница: 8 / 20

The DC air sleeve can be rotated 360° to allow for an interference free frame fit. To rotate the air sleeve simply let the
air out of the main air chamber, turn the air sleeve to the desired location and re-pressurize the shock.
: Setting Shock Sag, Coil Shocks (Glyde-Rpv, Glyde-RL, Vector-Rpv, Vector-RC, Vector-DH)
1. Adjust the threaded spring pre-load collar to zero by turning the threaded collar away from the spring until all pres-
sure is released from the spring. Adjust the threaded collar towards the spring until it touches the spring but adds no
pressure.
2. While the rider is seated in a normal riding position, measure the sag length
3. If the sag is greater than that of the manufacturer’s recommendation, tighten the threaded pre-load collar until the
correct sag is obtained. If the sag is less than the manufacturer’s recommendation, a softer spring rate is needed.
If the spring rate is a correct fit to the rider’s weight, the proper amount of sag can be achieved within the first 3 com -
plete turns of the thread pre-load collar. If after 3 complete turns, the proper sag is not achieved, then this is a good
Length
DC air sleeve