8.Features
© China Daheng Group, Inc. Beijing Image Vision Technology Branch 139
The FFC Plugin can be used to get, save and preview the FFC coefficient. The plugin interface is shown
in Figure 8-66:
Figure 8-66 FFC Plugin interface
it is demanded to acquire bright field images again for executing FFC after changing ROI, Binning,
Decimation, Mirror of the ME2P--GM/C-P camera. The previous coefficient will no longer apply.
There are three ways to obtain the FFC coefficient:
According to the current environment
Read from device (available for part of the camera)
Load file
There are two ways to save the FFC coefficient:
Write to device (available for part of the camera)
Save file
For cameras that support FFC, In addition to the plugin, FFC can be set to on/off in the camera
feature. When set to on, FFC coefficients stored in the camera can be used to calibrate the image.
