background image

Please 
read

the manual 
carefully

THANKS FOR CHOOSING

DAH SOLAR

Please remember that you are using a electricity 
generation product, in order to avoid any accident, 
it should adopt relative security measures.

The PV modules should be installed in the place with the maximum sunlight thoughout the year.
The output power will be maximum when modules are facing the sun in vertical.

In the northern hemisphere, modules should be placedtoward south as the first choice, 

while in the southern hemisphere, it should be placed toward north.

Angle Selection

Northern Hemisphere

Summer

Winter

PV module

Spring/Autumn

Southern Hemisphere

Climatic Condition

-40°C ~ 85°C

(-4°F ~ 185°F)

Ambient temperature

Don't install

PV modules in a

flooded risk area

Don't install in

raining, snowing or windy

weather conditions

- Please wear protective headcoats, insulated gloves, and rubber insulated shoes during installation job.
- To avoid unnecessary touching of the PV module during installation. The surface of modules may over 
heated, it has risk of burnt and electric shock.
- Due to the risk of electric shock, please do not proceed the installation work if junction box was wet.
- Use insulated and dry tools, do not use wet tools.
- Don’t use sharp tools to wipe the glass of PV module. It would leave scratches on the module.

Installation Safety

Содержание DHM-72X10/FS






Отзывы: