36
6.2
R
EMOVING A CARTRIDGE
,
Note:
It is not necessary to move the microscope to remove a cartridge.
Drive the cartridge up to the top of its stroke and open the guard doors as shown
in the previous section.
THERE MUST BE CLEARANCE TO
ENSURE THE GUARD DOES NOT
COLLIDE WITH THE TEST PIECE OR
WORK HOLDER
Keep your hands and fingers clear of the underside of the cartridge.
Loosen the clamp screw.
Hold the cartridge as shown on the previous section.
Push it with your left-hand thumb until the electrical connection is broken.
Continue to slide it towards the right until it is clear of the machine.
Note;
The guard will lower automatically to protect the tool
6.3
F
ITTING AND USING WORK HOLDERS
Drive the cartridge, if fitted, up to the top of its stroke.
THERE MUST BE CLEARANCE TO
ENSURE THE TOOL DOES NOT COLLIDE
WITH THE TEST PIECE OR WORK
HOLDER.
