Steps for taking a reading:
1) Press the on/off button (F).
2) The display will show all the symbols and you will hear two
short BEEPs, followed by a 0 flashing for two seconds. You feel a
slight pressure on the cuff. Do not move or talk.
3) Once the required pressure has been reached, it will begin
to deflate. In the event that this is not sufficient to take the
reading, the appliance will automatically re-inflate to a higher
pressure.
4) When the appliance detects a signal, a heart symbol will
begin flashing on the screen. You will be able to hear the beep
for each heartbeat once the heartbeat signal is detected.
5) When the reading is complete, you will hear a prolonged beep,
while the results of the reading are displayed on the screen.
6) The reading will remain displayed on the screen until you turn
off the appliance. If no button is pressed for a period of 3 minu-
tes, the appliance will automatically shutdown to save energy.
PLEASE NOTE: The irregular pressure indicator (M) will appear
next to the results of the reading if arrhythmia has been detec-
ted in the reading.
Bluetooth connection.
If you wish to connect the blood pressure monitor to the Daga
Flexyheat application on your mobile device or Tablet, firstly
press the Buetooth connection button (E) while the apparatus
is still turned off and the bluetooth connection icon will flash
on the screen , indicating that you can now connect the blood
pressure monitor by pressing the the bluetooth connection icon
that appears on the screen of the mobile application.
When the Bluetooth symbol in the application turns blue, this
means that the link has correctly taken place.
Rapid deflation during reading.
If you feel unwell during the reading or you wish to stop the
device for any reason, you can press the on/off button for the
Manual Tensio Brazo Bluetooth.indb 17
23/9/15 8:11
