Dafra RRT5212 Скачать руководство пользователя страница 2

Страница: 2 / 2

approx 1.0 mm gap

switch up

Adjust anvil so that 1 thread
of tool mandrel is showing.
Tighten anvil lock nut.

Hold forward
handle still

Rotate rear handle
anti clockwise until
rivnut is set in
work piece.

Note; gap increases as rivnut is set.
Use stoke guage for consistant setting

switch
down

Hold forward
handle still

Rotate rear handle
clockwise one turn.
Anvil will release
rivnut.

Rotate splined knob anti clockwise
to remove mandrel from work piece.

Return to position 1

approx 1.0 mm gap

switch up

RT5

12 setting a rivnut

Dafra Products 1/

7 Jarrah Drive Braeside VIC 3195 I dafra.com.au I 03 9555 6872

Содержание RRT5212

Страница 1: ...TS INTO SCRAP MATERIAL ONLY A SMALL AMOUNT OF FORCE IS REQUIRED TO SET THESE RIVNUTS UNNECESSARY OVER TIGHTENING MAY RESULT IN DAMAGE TO THE TOOL MANDREL OR RIVNUT THREADS IMPORTANT MAINTENANCE TIP AP...

Страница 2: ...piece Note gap increases as rivnut is set Use stoke guage for consistant setting switch down Hold forward handle still Rotate rear handle clockwise one turn Anvil will release rivnut Rotate splined k...