DRPB48 Operation Manual
TOOL OPERATION FOR SETTING BLIND RIVETS
1) After completing the start-up preparations, place the rivet mandrel into the nosepiece, and
holding the tool to insert the rivet into the pre-drilled hole of the work piece that needs to be
fastened.
2) Pull the tool
trigger (#43)
to set the blind rivet in its position on work piece.
3) After setting the rivet, tilt the tool to the front in order to release the mandrel from inside the
tool or tilt back the tool and the mandrel will be released from the back of the tool into the
mandrel release protector
. While using the tool, be sure always with the
mandrel release
protector
on the tool, in case a mandrel comes shooting out from the back and causes
injuries.
TOOL MAINTAINANCE
In order to maintain optimum performance after several weeks of regular use, add a few drops
of hydraulic oil on the inlet of the
air adaptor (#47)
of the tool in order to reduce the friction of
the tool parts since the oil will be blown inside the tool when tool is in operation.
After a period of use, the tool stroke may be reduced which indicated that the hydraulic oil in the
pneumatic tool needs to be refilled or changed;
1) Remove the
screw (#9)
with a hexagon wrench:
Содержание DRPB48
Страница 8: ...DRPB48 Operation Manual ...
