4. Operator Instructions
4.1 Cleaning of the PacMobile 20
Clean the DC charger once a year (during yearly maintenance) in the following way:
• Remove rough dirt by spraying with low-pressure tap water.
• Remove dirt by hand with a non-woven nylon hand pad.
• Rinse thoroughly with tap water.
• Optionally, apply wax on the front for extra protection and gloss.
• Do a check on the overall enclosure and on the frontal cover for cracks or other damages.
NOTICE
Ordinary
cleaning
Keep the air inlets clean and free from snow and leaves or from any other materials.
NOTICE
Rust
forming
When the charger is placed in a corrosion sensitive environment, the forming of superfi cial
rust is possible on the welding points. This rust is merely visual, there is no risk for the
enclosures integrity. The rust can be removed with the cleaning procedure described above.
To prevent the rust from reappearing; prime the areas with a transparent or color-like priming
fi nish (separate Service Instructions are available).
NOTICE
When the PacMobile 20 is exposed to rain, it is suffi cient to clean it twice a year.
CAUTION
Do not apply high-pressure water jets. Water may leak into the enclosure. If a high-pressure
water jet has been used, make sure that the inside of the enclosure is dry.
- Only use cleaning agents with a pH value between 6 and 8.
- Do not use cleaning agents with abrasive components.
- Do not use abrasive tools.
14
