INSTALLATION IN THE APPLICATION
• Do not install the PIR motion sensor outdoors to avoid
exposure to rain.
• PIR motion sensors cannot detect motion through glass,
such as someone moving outside the window.
• Do not install the PIR motion sensor within 3 feet
(1 meter) of heat sources such as electric heaters,
vents or fireplaces or other heat sources that may
create turbulent air.
• Do not install the PIR motion sensor behind large
appliances or furniture that may affect its signal
transmission.
• To avoid false alarms, make sure your pets can’t get
close to it.
WARM NOTICE
1. After having correctly installed your AM301 central
to your Daewoo Home Connect control
application, you can add your motion sensor WPS301.
To do this, click on “add an accessory + ” from the
page of your AM301 central.
2. Remove the safety tab from your device or set the
switch on the back to on.
3. Install your detector on the wall about 2 meters,
2 meters 20 from the ground. Avoid orienting it facing
the floor or placing bulky furniture facing the detector.
Your cat could climb on it and thus trigger your device.
