10
2600W Steam Iron
Model No. SDA1590
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Auto Shut-Off Function
The iron will automatically switch off if it has not been moved for:
-
30 seconds in level position, or
-
8 minutes in upright position.
To indicate that the iron has been switched off, the
Indicator Light
(8) will flash
and 6 beeps will be heard. To heat up the iron again:
1.
Pick up the iron or move it slightly.
2.
The
Indicator Light
(8) will then stay Red indicating that the Iron is heating up
again.
Self-Cleaning Function
Your iron will give the best ironing results and last longest if you apply the Self-
Cleaning once a month, or more depending upon the usage.
1.
Fill the water tank to half with water.
2.
Position the iron in the upright position on a stable surface.
3.
Plug the Iron into the mains supply.
4.
Turn the
Temperature Dial
(9) to MAX.
5.
Allow the iron to heat up until the
Indicator Light
(8) turns Blue.
6.
Unplug the iron from the mains power supply.
7.
Keep the iron horizontally over the sink.
8.
Set and hold the
Steam Adjustment Button
(3) to
SELF CLEAN position as shown right, boiling water
and steam will then emit from the soleplate after
few seconds.
9.
Move the iron forwards and backwards
until the water tank is empty.
10.
Release the
Steam Adjustment Button
(3) then it will go
back to ‘0’
.
11.
Plug the Iron into the mains supply.
12.
Turn the
Temperature Dial
(9) to MAX, then let the iron heat up again. The
remaining water inside the steam chamber will now vaporize through the
soleplate.
During this process of dry steaming, it is recommended to use it over an old
piece of cloth.
