Daewoo Super Vision 14A5, Инструкция по эксплуатации, Страница: 9 / 13

TIMER
CLOCK 1 2:20
WACKE UP TIME --:--
ACTIVATE YES
WACK UP PROG P 45
TIMER
CLOCK 12:20
WACKE UP TIME 7:00
ACTIVATE YES
WACK UP PROG P 45
In the MAIN MENU, Select TIMER menu.
SETTING THE CLOCK
Press the button on the CLOCK line.
Set the hours and minutes with the NUMBER button 0..9 Press
the OK button to complete. The clock will start.
Note that if you turn the TV off with MAIN POWER button, the
clock setting is lost and must be reset if necessary.
SETTING THE WAKE UP TIME
Set WAKE UP TIME in a same way to the above for CLOCK.
Set ACTIVATE "YES" or "NO" with the LEFT/RIGHT button.
When ACTIVATE is "YES", the function is enabled.
Set WAKE UP PROG using the NUMBER button 0..9 or
UP/DOWN button.
When WAKE UP TIME is operate, the set will switch on to this
programme number.
8
TIMER
By pressing the SLEEP button repeatedly, you can select one
of the following setting:
0->30min. ->60min. ->90min. ->120min. ->0
The set will turn off after time you select.
Automatic Switch-Off in No broadcast Signal
If a broadcasting signal is not present for about 5-30 minutes,
the set will be automatcally turned off.
In AV mode, however, this function dose not operate.
SLEEP
The RECALL button is used to diaplay the current status: pro-
gramme number, station name and clock.
This display appear for 5 seconds unless any button is pressed.
RECALL
You can prevent the use of the TV set without the remote con-
trol.
The set is child-locked after switching off the set by pressing the
Y, C, TELETEXT(
), POWER button ( ) in sequence on the
remote control within 5 seconds.
The child-lock function is indicated by flashing the STAND-BY-
INDICATOR.
The set can only be switched back on using the remote control.
CHILD LOCK
Pressing the TIME button, the current time is displayed on the
screen during 5 seconds.
If the programme you are watching has no Teletext transmission,
no time will be displayed
TIME