IDENTIFICATION
9
IDENTIFICATION
8
This section summarizes the buttons, controls, and terminals that you will use with your
VCP.
STANDBY/ON
Press to turn the VCP on or off.
STOP/EJECT
Press to stop tape movement and to eject a video cassette.
TRACKING
Press to adjust the tracking of tape automatically during
playback
AUTO REPEAT
Press to re-playback after rewinding
REW
Press to rewind a video cassette.
PLAY
Press to play a video cassette or press to during video
cassette playback to temporarily stop playback.
FF
Press to fast forward a video cassette.
REC/OTR
Press to record the program currently airing on the channel.
Press multipe times to process one-touch-recording (OTR)
time options.
VIDEO/AUDIO
Front input sockets for connecting a camcoder (This is only
available on some models. Check the Front of your Video).
FRONT PANEL DISPLAY
1. POWER
Indicates that the VCP Power is on.
2. RECORD
Indicates that the VCP is recording a program.
3. PLAY
Indicates that the VCP is in PLAY mode.
4. A. REPEAT
lndicates that the VCP is in Auto Repeat mode
When the power indicator is blinking on the display panel,
the VCP is in the child lock mode.
BACK PANEL
1. VIDEO IN/OUT
Attach the VCP’s video input/output
at there terminals.
2. AUDEO IN/OUT
Attach the VCP’s audio input/output
at there terminals.
3. ANT IN TERMINAL
Connect the TV antenna to the
terminal.
4. ANT OUT TERMINAL
Connect to the antenna terminal of
the TV receiver through the RF
cable (Provided).
