57
Trouble Shooting (VCR)
•
“Power On” does not work.
•
It does not work even in “Power On”.
•
A videotape is not inserted.
•
On inserting a videotape, the tape is
re-ejected.
•
A videotape is not ejected.
•
A channel on video and a play screen
does not appear.
•
Noise (screen noise) appears on
screen.
•
Noise appears on screen after
recording.
•
While in playing, noise appears.
•
Sound and screen are irregular.
•
Sound comes out but screen does not
appear.
•
Screen is irregular and stripes appears.
•
"Screen Error" message is displayed
in a screen.
•
While recording and playing, the top
of screen extremely waves.
•
Screen is not clear.
•
A screen at pause is trembling or slow
screen is not clear.
Checks
Symptom
➤
Please check whether a power plug is inserted in an electric outlet.
➤
Please check whether a videotape is inserted.
➤
Try to insert the plug again.
➤
Please check whether the power plug is inserted in an electric outlet.
➤
Please check whether a videotape is in.
➤
Please check whether a videotape is inserted in a right direction (a side
of transparent window should be on the upside)
➤
Have you inserted a videotape again just after the tape was ejected?
Please try it again after fully ejecting it.
➤
When a videotape forces to be ejected, the tape may not be inputted. In
the case, please pull out an outlet, and then push the tape smoothly.
➤
Please pull out the tape and insert it again.
➤
In case the product is used for a long time, a videotape may not be
ejected for a film inside may be stretched. In the case, please pull out
the power plug for about 10mins and then press “EJECT” button.
➤
Please check your antenna’s connection.
➤
TV channel should be fixed on video channel.
➤
Please check your antenna’s signal whether it may be weak. If the symptom
persists, please use a frequency amplifier connected with the device.
➤
Check if VCR is turned on.
➤
If the VCR is in recording mode, check if you have selected the correct
channel.
➤
Noise can appear in the beginning of a tape or when the tape is in
PAUSE mode. This is not a VCR malfunction.
➤
Please press “TRACKING” for better screen. Videotape may be poor. Try
to change it to another one.
➤
Please use a head-cleaner to clean VCR heads. VCR heads may be
contaminated.
➤
Since VCR Play signals are not stable like a TV signals, screen may be
unstable or curved while in playing. To fix the problem, please
horizontal adjustment.
➤
The videotape may not be recorded properly, or the tape may be old.
➤
Try to adjust the screen with the [T/-] buttons.
➤
Try to use a head-cleaner.
➤
Try to use a head-cleaner.
➤
Try to adjust the screen by [T/-] button.
Other
F
eatur
es
DC-G8J21D-RR/O 2008.5.19 2:16 PM ˘
`
57
