9
9L Dual Air Fryer
Model No. SDA2616
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Before the First Use of Your Air Fryer
•
Remove all packing materials and discard responsibly.
•
Ensure all parts are present see
Description of Parts
above.
•
Ensure that you clean your Air Fryer before first and every use with a damp cloth
and dry thoroughly.
•
Wash the two
Drawers
(2 & 5) and the two
Trivets
(7) in warm soapy water.
•
DO NOT
remove the silicone feet from the
Trivets
(7) as these are fitted to hold
the Trivet in place and prevent damage to the drawers.
•
Whilst using your Air Fryer for the first time you may notice a little smoke and
odour; this is normal and simply the protective grease used during manufacture
and will soon pass.
Control Panel Functions
Power On/Off Button (10)
•
The
Power On/Off
(10) button will illuminate once the fryer is plugged in.
•
Press the
Power
On/Off
(10) button to switch the unit on, the
Left
&
Right
Drawer Control
(19 & 21) buttons will illuminate
.
•
The air fryer will switch to standby mode if no selection is made within 1 minute
and only the
Power On/Off
(10) button will remain illuminated.
•
Press the
Power On/Off
(10) button again to switch the unit off.
•
At the end of cooking, both the
Left
&
Right
LED Displays
(12 & 13) will show
“
End
”
, the fan will continue to run for a short while to cool the fryer after use.
Left & Right LED Displays (12 & 13)
•
The
Left
&
Right
LED Displays
(12 & 13)
will show the set temperature and both
the set and remaining cooking time
.
Start/Pause Button (15)
•
Press the
Start/Pause
button (15)
to start or pause cooking.
Temperature Setting Buttons
(17 & 18)
•
Press
the
Temperature
Setting
buttons (17 & 18) to adjust the cooking
temperature to override pre-set functions where required.
•
The temperature will increase or decrease in 5°C increments.
•
Press and hold to fast cycle from minimum 80°C to maximum 200°C for all pre-
set functions except Dehydrate (30°C -100°C).
Drawer Control Buttons (19 & 21)
•
Press
the
Left Drawer Control
(19) to select the
Left Drawer
(5). The button will
flash when pressed.
•
Press
the
Right Drawer Control
(21) to select the
Right Drawer
(2). The button
will flash when pressed.