8
10L Water Urn
Model Number: SDA1596
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Boil dry protection
Should you accidentally let the appliance operate without water; the boil-dry
protection will automatically switch off the power. If this occurs, disconnect from
the mains supply and allow the appliance to cool. Repeatedly dry boiling will have
an adverse effect on the life of the boil dry protection device and element,
shortening the useful life of your Water Urn.
Important
–
Descaling your Water Urn/Reducing Limescale Build up
•
To prolong the life of your Water Urn it is imperative that it is descaled regularly.
•
The frequency of the descaling depends on the hardness of the water in your
area and how often the appliance is used.
•
In extreme hard water areas, descaling your Water Urn at least once a month is
highly recommended also the use of filtered water in your Water Urn will
increase the life expectancy and help prevent excessive lime scale build up.
•
If the Water Urn switches off before it boils or has a white deposit building up
inside then it will need to be descaled.
Do not use vinegar but a commercially available descaling agent; carefully follow
the quantities recommended in the instructions of the agent.
Care and Use of Your Water Urn
Always turn off the power supply, remove the mains plug and allow the Water
Urn to cool.
•
Always rinse the Water urn immediately after each use.
•
Pour a small amount of hot water into the tank, brush the sides and bottom
of the tank with a soft brush, removing any scale or sediment and rinse with
hot water until it runs clean.
•
Clean the exterior with a soft cloth or sponge with warm water and a mild
detergent, do not use harsh or abrasive cleaners as this could damage the
surface finish of the Water urn and lead to corrosion.
•
Do not immerse the Water Urn in water or any other liquids.
Non-Rewireable Mains Plug
If your appliance is supplied with a non-rewireable plug fitted to the mains lead
and should the fuse needed replacing, you must use an ASTA approved one
(conforming to BS 1362 of the same rating). Never use a plug with the fuse cover
missing. If in doubt, consult a qualified electrician.
If you need to remove the plug -
DISCONNECT FROM THE MAINS
- and then cut it
off the mains lead and immediately dispose of it safely. Never attempt to reuse
the plug or insert it into a socket outlet as there is a danger of electric shock.