E-3
PreParIng the FrIdge / Freezer
To Prepare your appliance for use and check that it is running correctly, take the following steps.
1. Install removed all shelves and compartments during transport in the correct positions.
2. Clean the fridge / freezer and accessories to remove any dust that accumulated during packing and shipping.
3. The interior light should be turned on when the refrigerator door’s opened
4. Set the temperature control to the coldest temperature and let the refrigerator operate for one hour. The freezer should
get slightly chilled and the motor should run smoothly with a soft hum and no noise. Your fridge / freezer is operated by a
compressor which switches “on and off” to maintain the internal temperature. When compressor is new, it requires running in
for a period of up to five months. During this period, it may be slightly noisy. This is quite normal and does not represent a fault.
5. Store food once the temperature in the refrigerator is sufficiently low. It takes a few hours after starting the refrigerator to reach
the proper temperature.
If the appliance does not operate correctly, check the electricity supply. If the problem persists, contact your dealer.
Ce
This product has been designed, constructed and marketed in accordance with EEC directives 2006/95/CE, 2004/108/CE, and
96/57
Please read this manual carefully to ensure maximum satisfaction from your appliance. Keep the manual in a safe place for
future reference. For drawings referenced in the text below, see flap at back of the manual.
WARNING
Use of an earthed socket exclusively
For the appliance :
• If you are using a socket with an earthed terminal, you do not require
a separate earthed connection.
Use of a non-earthed socket :
• Connect the “earthed wire” to the steel plate and bury it at depth of
at least 25cm in the ground.
leVelIng
If the front of the appliance is slightly higher than the rear, the door can be opened and closed more easily.
1. The appliance tilts down to the left.
Turn the left adjusting leg in the direction of the arrow until the appliance is lever.
2. The appliance tilts down to the right.
Turn the right adjusting leg in the direction of the arrow until the appliance is lever.
25cm
AD302-1(영).indd 3
2012-11-05 오후 12:16:50
