6
5
VACUUMING:
■
Before use ensure that you have released a sufficient length of cable, and then plug the
device into the wall socket. The ideal cable length is identified on the cable by a yellow
marking. When unrolled, The is identified by the red marking.
■
Turn on the RCC-240Y model cyclone vacuum cleaner by gently tipping the foot to press
down on the ON/OFF switch.
Note:
On rare occasions it is possible that a "whistling" sound may be heard when the device is
switched on. This will cease after a short period and does not indicate the presence of fault.
Stop:
Never use the device to vacuum clay, cement, drill or plaster.
These materials will block the filter.
Varying the suction capacity:
You can use the suction capacity regulator to select individual suction requirements. Turn the
regulator forth in order to increase the suction capacity, back to decrease it.
•
MIN:
This level is ideal when vacuuming sensitive materials such as curtains.
•
MIN-MAX:
The middle level is suitable for upholstered furniture, carpets and mattresses.
•
MAX:
This level should only be used for robust flooring such as wood and tiles.
Secondary air valve:
The secondary air valve, which is located on the device handle, allows you to control the
suction power of the RCC-240Y model cyclone vacuum cleaner more finely. It is recommended
that the secondary air valve be opened when cleaning curtains etc. in order to avoid them were
being drawn in to the device.
To open:
push forward
To close:
push backwards
After vacuuming:
Once you have finished vacuuming turn the device off:
•
Use either the foot or the hand to press the ON/OFF switch on the RCC-240Y cyclone
vacuum cleaner.
•
Remove the plug from the wall socket. (Never pull on the cable, always apply light pressure
to the plug housing)
•
Take the plug in your hand in order to avoid the cable flicking up during the winding
process. Press down on the cable rewind button with the foot until the cable has rewound
completely onto the cable drum, which is inside of RCC-240Y cyclone vacuum cleaner.
•
In order to place the device in its parking position, use the hook located above the floor
nozzle to guide it into the RCC-240Y cyclone vacuum cleaner nozzle holder.
