5
6
6
5
FILTER CLEANING SYSTEM:
The cleaner RCC-231 cyclone vacuum cleaner is fitted with a unique filter cleaning system.
This allows you to remove the dust from the receiver tank in a completely new, clean and
comfortable manner.
EXPLANATION OF ACCESSORIES:
You will receive two different nozzles with your RCC-231 cyclone vacuum cleaner.
These allow the device to be utilized for a variety of applications.
Floor nozzle:
The floor nozzle is the fitting most commonly used. It is perfect for us on large, even areas.
The 360 joint allows the nozzle to gain access to every corner with ease and without
complication. The toggle switch provides you with the option of using the floor nozzle with a
range of floor covenngs:
• For carpets: Push the toggle switch to select the symbol
for carpet. By pressing the toggle switch you will have
lowered the brushes.
• For polished floor coverings, press the toggle symbol for
smooth flooring. The brushes that have now been lowered
are perfect for cleaning tiles, parquet flooring and PVC.
"T" Brush nozzle:
The brush nozzle is the best fitting for cleaning sensitive
surface such as picture frames or books.
Crevice nozzle:
The crevice nozzle is well suited to the vacuuming those
areas that you are unable to gain access to tight spaces,
material folds (e.g. crease in armchairs), corners and niches
using the crevice nozzle.
ASSEMBLING YOUR RCC-231 CYCLONE VACUUM CLEANER:
Attention:
Before attaching or detaching any accessories always ensure that you unplug the power
supply from the wall socket!
1. Attaching or detaching the hose:
To attach:
Push the vacuum hose into the air intake opening until it snaps into place.
To detach:
Push the button on the vacuum hose to release the hose.
2. Attaching the telescopic tube and its accessories:
• Mount the telescopic rube onto the handle
• Set the telescopic tube to the desired length. In
order to do this simply push the slide on the
telescopic tube forwards before pulling on the
lower part of the tube until it has reached the
length required. Once you have selected the
optimum length, let the slide return to its original
position and ensure that it snaps shut.
• Now attach the floor brush to the telescopic tube
as shown in the diagram. Attach the crevice
nozzle and brush nozzle using the same method.
