6
7
EMPTYING THE DUST RECEIVER TANK:
EXHAUST FILTER:
Always unplug the appliance before emptying the dust receiver tank!
Press the switch and pull the dust tank upright, show as the picture.
•
Remove the plug from the wall socket. (Never pull on the cable, always apply light
pressure to the plug housing)
•
Remove the exhaust air filter cover by pressing the interlock release button.
•
Take out the exhaust air filter and rinse it well under cold, clean water before leaving to
dry. Never clean the exhaust air filter using soap or any other cleaning fluid. This
would destroy the filter!
•
Replace the exhaust air filter.
•
If the exhaust air filter is heavily soiled, it is recommended that the filter be replaced
with a new one.
•
Replace the exhaust air filter cover.
Hold the dust receiver tank over your dustbin and pull the interlock device back, show
as the picture.
Disposal:
If you wish to dispose of the packaging, please ensure that you do so in an
environmentally friendly manner and take it to a recycling facility. If you wish to dispose of
the device itself at any point, please also do so in an environmentally friendly manner.
This device should not be disposed of alongside general household waste. Please contact
your local waste collection office or recycling centre. They will be able to advise you
further.
We withhold the rights to make changes to our products, packaging and user instruction
manual at any time within the framework of on-going developments.
Once the tank is empty it is recommended that the HEPA filter be cleaned if necessary.
•
Carefully turn the HEPA filter in “loose” clockwise direction, until it disengages. Now
remove the HEPA filter.
•
Clean the HEPA filter thoroughly. Never clean the HEPA filter using soap or any other
cleaning fluid. This would destroy the filter!
•
If the HEPA filter is heavily soiled, and this is leading to a reduction in suction power, it
is recommended that the filter be replaced with a new one.
Once cleaning is complete, replace the filter by simply reversing the process outlined above.
•
Place the HEPA filter back in the dust receiver tank and turn it carefully in “close”
anti-clockwise direction, until it locks in place.
Содержание RC-220
Страница 1: ......
