Daewoo Lanos 2002, Руководство пользователя

Страница: 106 / 174

6–4 IN CASE OF EMERGENCY
WARNING
When using the jack the vehicle
could become unstable and move,
damaging the vehicle or badly injur-
ing.
• Use jack supplied at correct jack-
ing position.
• When installing the jack for lifting
the vehicle, it should be perpen-
dicular to the ground.
• Do not go under a jacked-up ve-
hicle.
• Do not start engine while jacked-
up.
• Before jacking, get all passengers
out of the vehicle and clear of ve-
hicle and other traffic.
• Use jack only for changing wheels.
• Do not jack vehicle on an inclined
or slippery surface.
• Use jacking position nearest to re-
quired wheel change.
• Block wheel diagonally opposite
the wheel to be changed.
• Before jacking ensure handbrake
is on and the transmission is set in
1 st or reverse gear(M/T) or P(A/T).
• Do not jack the vehicle and
change the wheel where traffic is
close.
5. Raise the vehicle by rotating the jack
handle clockwise until the jack lifting
head fits firmly into the notch and the
wheel is off the ground (about 3cm).
Do not raise the vehicle more than nec-
essary.
As the jack touches the vehicle and be-
gins to raise the vehicle, double check
that it is properly positioned and will not
slip.
6. Remove the wheel bolts by turning them
counterclockwise and then remove the
wheel.
7. Mount the spare wheel in position and
tighten the wheel bolts hand-tight by
turning clockwise.
8. Turn the jack handle counterclockwise
and lower the vehicle to the ground.
Tighten the wheel bolts firmly in "X" pat-
tern (1-2-3-4).
9. Install the wheel cover.
2
1
4
3
Fasten