Daewoo KQG-868G7S, Руководство по обслуживанию

Страница: 12 / 34

11
4. Method to reduce the gap between the door seal and the oven front surface.
(1) To reduce gap located on part ‘A’
• Loosen two screws on stopper hinge top, and then
push the door to contact the door seal to oven front
surface.
• Tighten two screws.
(2) To reduce gap located on part ‘B’.
• Loosen three screws on bottom hinge, and then the
door to contact the door seal to oven front surface.
• Tighten three screws.
NOTE:
A small gap may be acceptable if the microwave leakage does not exceed 4m W/cm
2
.