7
CONTROLS
SETTING THE CLOCK
When the oven is first plugged in, the display will flash “:0”. If the AC power ever goes off, the display shows
“:0” when the power comes back on.
1. Touch the CLOCK pad.
This is a 12 hour clock system.
2. Touch the CLOCK pad once
more.
This is a 24 hour clock system.
3. Enter the correct time of day by touching the TIME SET
pads in sequence.
4. Touch the the CLOCK pad.
NOTE: If you attempt to enter an incorrect time, the time will not be set and it will return to previous
status. Touch the CLOCK pad and re-enter the time.
The display stops blinking, and the colon
starts blinking. If you selected 12 hour clock
system, this digital clock allows you to set from
1:00 to 12:59.
If you selected 24 hour clock system, this
digital clock allows you to set from 0:00 to
23:59
NOTE: Your oven can be programmed for
59minutes 90seconds.(59:90).
TIME DEFROSTING
When DEFROST is selected, the automatic cycle divides the defrosting time into periods of alternating
defrost and stand times by cycling on and off.
1. Touch the DEFROST pad.
2. Touch the TIME SET pads for inputing the desired time.
3. Touch the START pad.
The display will show you " : 0" .
The display will show you what you touched.
When you touch the START pad, the display counts down the time to show you how much defrosting time is
left. The oven beeps during the defrosting cycle to signal that the food needs to be turn over or rearranged.
When the defrosting time ends, you will hear 3 beeps.
