10
4. Installation (See “Reference Fig. for BUILT-IN”)
1) After unpacking box, tum down the oven
on the table.
2) Attach the sponge blocking bar
1
to the rear side
of bottom enclosure by self-adhesives.
3) Attach a Front Bracket
2
to the front side of bottom
enclosure by slide fit.
4) Turn the oven.
5) Mount the other Front Bracket
2
to the front side of
top enclosure by slide fit.
6) Pass out power plug through inside passing hole to
outside and insert the oven into the mounting
cabinet hole.
7) Fix the oven the front surface of cabinet by 4 screws
3
.
5. Reference Fig. for BUILT-in
1
2
2
1
2
3
No.
PART NAME
1
SPONGE BLOCKING BAR
2
FRONT BRACKET
3
MOUNTING SCREW
